ASTM A240 Stainless Steel Plate, Sheet and Strip: A Buyer’s Guide

Learn what ASTM A240 covers, how A480 general requirements fit, and what grade, form, edition, units, dimensions and documents to state when buying stainless plate, sheet or strip.

Published

If your drawing calls for ASTM A240 stainless steel, you still need to specify the grade, product form and delivery condition. This guide explains what A240 covers, how A480 applies and which details to include when requesting a quotation.

Stainless steel plate inventory arranged in a Hechuang warehouse
Stainless steel flat products stored for supply and processing.

What ASTM A240 covers

As of 12 October 2026, ASTM lists A240/A240M-26 as the active edition. It is the specification for chromium, chromium-nickel and chromium-manganese-nickel stainless steel plate, sheet and strip used for pressure-vessel and general applications.

That scope gives buyers a clear product boundary:

  • Plate, sheet and strip: these are the flat-product forms within the A240/A240M scope.
  • Coil: coil describes the delivery format. State the thickness, width, edge condition and coil details, and confirm the applicable plate, sheet or strip classification under A480/A480M.
  • Pipe, tube, bar, forgings, flanges and fittings: these require the product specification that applies to that form. A240/A240M should not be used as a universal material specification for them.

See the forms Hechuang supplies on our stainless steel plate, sheet and strip pages.

What A240 does not decide by itself

An A240/A240M reference sets the material-specification framework. It does not tell the supplier which grade, form, size or delivery details you need.

The A240/A240M reference establishes The enquiry or order still needs to state
The applicable stainless flat-product material specification Exact grade or designation and the required edition
Chemical and mechanical requirements for the selected grade Plate, sheet or strip and the required dimensions
A basis for material conformity Unit system, condition or finish, quantity, inspection and documents

“A240 plate” omits the grade, while “310S plate” omits the product standard. Our 310S standards and designations guide explains the grade identity in more detail.

A240 conformity alone does not establish suitability for a particular furnace application. Review metal temperature, atmosphere, load and thermal cycling separately.

How ASTM A240 and ASTM A480 work together

ASTM A240/A240M is the material specification for the stainless grades and flat products within its scope. ASTM A480/A480M provides the general requirements used with A240/A240M.

As of 12 October 2026, ASTM lists A480/A480M-25b as the active edition. A480/A480M general requirements apply to A240/A240M unless the purchase order or product specification states otherwise. If an A240/A240M requirement conflicts with a general A480/A480M requirement, the product specification takes priority. A purchase order may add a stricter requirement, but it cannot waive or weaken a mandatory requirement in the governing specifications.

State the required A240/A240M edition and unit designation. If the project controls an A480/A480M edition, state it too; otherwise, ask which edition the offer uses.

For thickness limits and measurement, use our stainless steel plate thickness tolerance guide. This article does not reproduce A480/A480M tables.

Choose one unit system

ASTM publishes A240/A240M and A480/A480M in inch-pound and SI systems. The values are not necessarily exact equivalents, so use each unit system independently.

If the order does not specify the applicable M designation, ASTM states that the material will be furnished in inch-pound units.

On an A480M order, use the dimensional-tolerance tables in Annex A3. The metric conversions printed alongside Annex A2’s inch-pound figures do not replace those tables.

If the order is metric, state the applicable M designations. A consistent metric line could begin:

Illustrative RFQ: ASTM A240M-26 Type 310S (UNS S31008) plate; ASTM A480M-25b general requirements; 10 mm × 1,500 mm × 6,000 mm; 4 plates; hot-rolled, annealed and pickled (No. 1 finish); EN 10204 Type 3.1 inspection certificate, traceable to the supplied plates. Please confirm availability and lead time.

This is an example, not a real customer order or a complete technical specification. The quantity and Type 3.1 certificate are buyer-selected requirements for this example; A240 does not make them the default for every order.

For an inch-pound order, use ASTM A240-26 and keep the dimensions and acceptance requirements in that system. If the project separately specifies an A480 edition, use its inch-pound designation too.

Name plate, sheet or strip

Product form affects dimensions, tolerances, finish, edges, processing and handling. “Flat stainless steel” is too broad for an order line.

Use plate for the heavier flat-product form identified by the applicable order requirements. Use sheet for thin flat product supplied to the required finish and as cut length or coil. For strip orders, also specify any requirements for slit width, edge condition, burr, camber and winding direction. Confirm the final plate, sheet or strip classification against the A480/A480M edition and dimensional conditions used for the order.

Our 310S plate versus sheet guide explains how product definitions and fabrication affect the choice. For slit material, the 310S coil slitting guide covers width combinations, edges and downstream processing-line requirements.

What to include in an A240 order

When the project is ready for a formal quotation, work through these fields in order:

  1. Standard and edition: state the required A240/A240M edition. Add A480/A480M when the project or purchase order separately controls its edition; otherwise, ask which edition the offer uses.
  2. Unit system: use the SI M designations or the inch-pound designations consistently.
  3. Grade or designation: identify the grade required by the project.
  4. Product form: plate, sheet or strip.
  5. Dimensions and quantity: give thickness, width, length or coil details, piece count or weight as applicable.
  6. Condition and finish: state the required rolling, heat-treatment and surface conditions.
  7. Dimensional acceptance: add any special minimum, tolerance or measurement requirement.
  8. Processing: include cutting, slitting, levelling, forming or other required work and the drawing revision when relevant.
  9. Inspection and documents: state the required tests, reports and inspection-document type.
  10. Packing and delivery: State the destination, packing requirements and required delivery date. Include a quotation deadline if one applies.

Start an enquiry before every detail is fixed

You do not need to complete all ten fields before contacting us. For an initial availability check, send the information already known:

  • grade;
  • plate, sheet or strip;
  • thickness, width and length or coil details;
  • quantity;
  • destination;
  • intended application if the standard, condition or finish is still open.

We can review the available supply options and flag missing details. Your first enquiry can be a simple stock check. Before placing the order, agree what “standard tolerance” and “mill certificate” mean for the material being offered.

Common problems in A240 enquiries

The grade is missing. “ASTM A240 stainless steel” covers multiple grades, so the supplier cannot check the requirements for the requested grade until the grade or designation is stated.

The product form is unclear. Coil describes how the material is delivered, not whether A480/A480M classifies it as plate, sheet or strip. State the thickness, width, edge condition and coil details needed for the order.

The edition or unit system is missing. The supplier may otherwise quote against a different edition or, without the applicable M designation, furnish material in inch-pound units.

The buyer assumes the grade name proves cross-standard equivalence. A familiar designation does not automatically establish equivalence among ASTM, EN, JIS or GB requirements. Use the product standard and designation required by the project.

The document request is vague. “Material test certificate (MTC) required” does not identify the inspection-document type, required results or traceability level. State the exact document basis before material is reserved or cut. Our MTC and EN 10204 3.1 guide explains the document question separately.

Hechuang flat-product supply

We supply plate, sheet and strip across Hechuang’s heat-resistant stainless grades, subject to confirmation of the exact grade, form, dimensions, quantity, condition, processing and lead time.

Our supply range includes cold-rolled sheet and coil from 0.25 to 8 mm, hot-rolled coil and thin plate or sheet from 3 to 16 mm, and medium or heavy plate above 16 mm up to 150 mm. Maximum flat-product width is 2,500 mm. These are Hechuang supply ranges, not ASTM definitions or guaranteed stock.

For current availability, send the required line item. We will distinguish material that is in stock from material available through the regular supply programme.

A current stock list is only a snapshot. It does not define Hechuang’s full supply range, so ask us to check availability and lead time for the required combination.

A240 enquiry template

  • Grade or designation:
  • Product form: plate / sheet / strip
  • A240/A240M edition:
  • A480/A480M edition, if separately specified by the project or purchase order:
  • Unit system: SI / inch-pound
  • Thickness × width × length or coil details:
  • Quantity:
  • Condition and finish:
  • Processing:
  • Inspection and documents:
  • Destination:
  • Packing requirements:
  • Required delivery date:
  • Quotation deadline, if applicable:

If an item is not yet decided, mark it as open and describe the application so we can identify what still needs to be confirmed before order acceptance.

Frequently asked questions

  1. What products does ASTM A240/A240M cover?

    It covers stainless steel plate, sheet and strip for pressure-vessel and general applications. It is not a universal specification for pipe, tube, bar, forgings, flanges or fittings; those forms need their applicable product specifications.

  2. Is ASTM A240 the same as ASTM A480?

    No. A240/A240M is the material specification for the stainless flat products and grades within its scope. A480/A480M provides general requirements that apply to A240/A240M unless the purchase order or product specification states otherwise.

  3. Does a metric order need the M designation?

    Yes. When the order uses SI units, state the applicable `M` designation and edition for A240M. Do not mix SI and inch-pound table values as if they were exact equivalents. If the project separately controls an A480M edition, state that edition as well.

  4. What can I send if the standard edition or finish is not fixed yet?

    Send the known grade, product form, dimensions, quantity, destination and application. Mark the open items clearly. Hechuang can review the available supply options and identify what needs to be fixed before a formal order is accepted.

Technical Sources

Technical references apply to the material designation, product form and condition described here. They do not certify an individual delivery; the order and material certificate identify the supplied material.

Build Your Enquiry

Send the grade, product form, dimensions and quantity for an initial check. If the A240 edition, any separately specified A480 edition or the finish is already fixed, include it so we can quote the material you need.

View stainless steel plateCheck theoretical weightReview quality and inspectionRequest a quotation

Send your RFQ

Required fields are marked with an asterisk.

Up to 5 files · 10 MB each · 50 MB total. PDF, Office, images, DWG, DXF, STEP/STP and IGES/IGS.

    0 files · 0 MB

    By submitting, you agree that Hechuang Stainless Steel may use these details to respond to your request. Privacy notice.