ASTM A312 Stainless Steel Pipe: Scope, Tests and Ordering Requirements

Learn what ASTM A312 covers, how A999, B36.19 and B31.3 fit, which tests A312 requires and what to state when ordering stainless steel pipe.

Published

ASTM A312/A312M is a product specification for seamless, straight-seam welded and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. It controls important product requirements, but it is only one part of a complete pipe order.

A caliper checking the wall at the end of a stainless steel pipe
Dimensional checks support the ordered pipe description, but the standard, test route and document requirements still need to be stated in the order.

ASTM A999/A999M supplies general pipe requirements, ASME B36.19 supplies the dimensional framework, and a code such as ASME B31.3 governs the wider process-piping design and construction context. A pipe can conform to A312 without that conformity alone proving the pressure design, fabrication or completed system complies with B31.3.

As checked on 19 October 2026, ASTM lists A312/A312M-25 and A999/A999M-23 as active. ASME lists B36.19-2026 and B31.3-2024. Use the editions required by the project and record them in the enquiry, quotation and purchase order.

What ASTM A312 Covers

ASTM A312/A312M-25 covers austenitic stainless steel pipe made by three routes: seamless, straight-seam welded and heavily cold worked welded. The specification is intended for high-temperature and general corrosive service.

Within that scope, A312 addresses the applicable grades, manufacture, heat treatment, mechanical requirements and tests. It also provides optional supplementary requirements that a purchaser may add when a greater degree of testing is needed.

The scope statement is not a service approval. Material selection still depends on the project specification, design code, temperature, pressure, process medium, corrosion or oxidation allowance, fabrication and inspection plan. The responsible engineer must confirm those requirements.

Four Documents with Different Jobs

Document Main job in the order What it does not prove by itself
ASTM A312/A312M Product specification for the stated austenitic stainless pipe scope, including grade, manufacture, heat treatment, mechanical requirements and tests Complete piping-system design or project suitability
ASTM A999/A999M General requirements used with listed alloy and stainless pipe product specifications, including A312/A312M The selected grade, dimensions or project-specific acceptance package
ASME B36.19 Dimensional framework for welded and seamless wrought stainless steel pipe Grade, manufacture route, heat treatment, A312 test route or pressure rating
ASME B31.3 Process-piping requirements covering materials and components, design, fabrication, assembly, erection, examination, inspection and testing Proof that one material certificate or one product standard completes the code assessment

A999/A999M states that the product specification prevails if its requirement conflicts with a general A999/A999M requirement. A more stringent purchase-order requirement prevails over both. The practical result is that the buyer must read A312, the applicable general requirements and the project order together rather than treating one designation as the whole specification.

SML, WLD and HCW

These abbreviations identify manufacture routes in an A312 pipe description:

  • SML means seamless.
  • WLD means straight-seam welded.
  • HCW means heavily cold worked welded.

They are not grades or quality rankings. Seamless pipe is not automatically better, and a welded route is not automatically acceptable for every project. State the route required by the piping class or project specification. If more than one route is permitted, say so and require the quotation to identify the offered route.

For a fuller route comparison, see the 310S seamless versus welded pipe guide.

What the A312 Test Statement Means

The public ASTM abstract for A312/A312M-25 states that each pipe is subject to a nondestructive electric test or a hydrostatic test. The word or matters. The standard statement does not mean every pipe receives both tests, and it does not make ultrasonic testing, radiography and third-party witnessing universal requirements.

An A312 order also involves requirements for chemical composition, heat treatment and applicable mechanical tests. When comparing quotations, check the stated delivery condition and the reports included for the ordered grade. Keep the pipe test method separate from the chemical and mechanical test results, and confirm how the documents will link to the supplied material. Specify any additional reporting needed by the project before placing the order.

If the project requires both test routes, a particular nondestructive method, broader examination coverage, radiography, witness points or additional reports, state those requirements in the enquiry and purchase order. Confirm the method, coverage, acceptance criteria and reporting before production. Optional supplementary requirements are purchaser-selected order items; they are not a default package for every Hechuang quotation.

The stainless steel inspection before shipment guide covers the separate task of checking ordered quantities, dimensions, surface condition, documents, marking and release status before dispatch.

Grade Names in an A312 Order

Use the grade designation required by the governing product specification. For an A312 order, TP310S is the product-specification grade designation, while UNS S31008 is the associated UNS material identifier. Plain 310S is useful commercial shorthand, but it does not state the product standard, manufacture route or acceptance requirements.

ASTM A312 identifies TP310H as a modification of TP310S intended for service where creep and stress-rupture properties are important. TP310H is not an automatic substitute for TP310S. Any change in grade or product specification needs the responsible engineer’s approval and must be recorded in the quotation and purchase order.

Pipe Is Not Tube

Do not replace a pipe specification with a tube specification because the grade name or outside dimensions look similar.

ASTM A213/A213M covers seamless boiler, superheater and heat-exchanger tubes. ASTM A269/A269M covers nominal-wall-thickness seamless and welded stainless steel tubing for general service. ASTM A358/A358M is a separate specification for electric-fusion-welded austenitic chromium-nickel stainless steel pipe and uses class-dependent manufacture and radiography provisions.

Use the product word and standard stated by the drawing, piping class or project specification. If the project calls for A312 pipe, quote A312 pipe. If it calls for tube or a different welded-pipe specification, keep that requirement separate.

What to Include in an A312 Pipe Order

An offer described only as “310S pipe, NPS 2, Sch 40S, 6 m” still leaves the product specification, manufacturing route, testing and documents unclear. Ask the supplier to confirm those items before treating two offers as equivalent.

Include the following details in your RFQ or purchase order:

  1. Product specification and edition: ASTM A312 or A312M and the required edition.
  2. Unit system: use the SI M designation or the inch-pound designation consistently.
  3. Grade: state the exact A312 grade and retain any project material identifier.
  4. Manufacture route: SML, WLD, HCW or the routes the project permits.
  5. Dimensions: state the B36.19 edition or other dimensional basis, NPS or DN, Schedule, nominal OD and wall, and units.
  6. Length and quantity: include cut length, random length or project-length requirements and the commercial quantity basis.
  7. Ends and processing: state plain or prepared ends, bevel details, cutting and any drawing-controlled work.
  8. Tests and purchaser requirements: identify the A312 test route and any additional examination, supplementary requirement, witness point or acceptance criterion.
  9. Documents and delivery: define material documents, traceability, marking, packing, destination and required date.

For NPS, DN, Schedule, OD and nominal wall, use the stainless steel pipe Schedule versus wall thickness guide. This article does not reproduce the B36.19 dimension tables.

Illustrative RFQ Template

Product specification and edition: ASTM A312M-25

Grade: TP310S / UNS S31008

Manufacturing route: [SML / WLD / HCW; state the permitted route(s)]

Dimensional basis: ASME B36.19-2026, or the project-specified basis

Size: NPS [ ] / DN [ ]; Schedule [ ]; nominal OD [ ] × wall [ ] mm

Length and quantity: [ ]

Ends and processing: [ ]

Pipe test method: [nondestructive electric / hydrostatic / supplier to confirm]

Additional testing or witnessing: [ ]

Documents and traceability: [ ]

Destination and required date: [ ]

Replace the sample editions and placeholders with the requirements specified for your project.

Start the Enquiry Before Every Field Is Fixed

You can ask for an availability review before the complete order line is ready. Send the information already known:

  • application or piping class;
  • grade, if fixed;
  • drawing or size description;
  • manufacture route, if fixed;
  • length and quantity;
  • destination and required timing.

Mark open items clearly. Hechuang can review the requested supply route, identify missing purchasing inputs and state the offered basis in the quotation. This review does not replace the project engineer’s material selection or piping design.

What Hechuang Can Supply and Confirm

Hechuang supplies heat-resistant stainless steel pipe in seamless and welded routes, subject to confirmation of the exact grade, product specification, dimensions, manufacture route, quantity, tests, documents and current availability.

We can review an A312 line item, confirm the product and dimensional basis used in our offer, and quote agreed cutting, end preparation, inspection, documentation and export packing. Additional testing, third-party witnessing or supplementary requirements can be included when they are defined before order acceptance and confirmed in the quotation.

Frequently asked questions

  1. What does ASTM A312 cover?

    It covers seamless, straight-seam welded and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service. The order still needs the grade, edition, route, dimensions, quantity and purchaser-selected requirements.

  2. Is ASTM A999 the same as ASTM A312?

    No. A312/A312M is the product specification for the pipe within its scope. A999/A999M supplies general requirements to listed alloy and stainless pipe specifications, including A312/A312M, unless the product specification states otherwise.

  3. Does every A312 pipe receive both hydrostatic and nondestructive electric testing?

    No. The public A312/A312M-25 abstract states that each pipe receives a nondestructive electric test or a hydrostatic test. If the project needs both routes or a specific additional examination, state it in the order and obtain written confirmation.

  4. Does A312 compliance prove ASME B31.3 compliance?

    No. A312 is a product specification. B31.3 covers the wider process-piping system, including design, fabrication, assembly, erection, examination, inspection and testing. The responsible engineer must confirm the complete code basis.

  5. Is TP310S the same as UNS S31008, and how does TP310H differ?

    TP310S is the ASTM A312 grade designation associated with UNS S31008; 310S is the common commercial name. An order still needs the product specification, manufacturing route, dimensions and acceptance requirements. TP310H is a separate grade intended for service where creep and stress-rupture properties are important. It is not an automatic substitute for TP310S. Any proposed substitution must be approved against the project requirements.

  6. Can ASTM A312 be used for stainless steel tube?

    Do not use A312 automatically for tube. Tube standards such as A213/A213M and A269/A269M have different scopes and requirements. Use the product standard required by the project drawing or specification.

Technical Sources

Technical references apply to the material designation, product form and condition described here. They do not certify an individual delivery; the order and material certificate identify the supplied material.

Send Your A312 Pipe Requirement

Send the A312 or A312M edition, grade, route, size description, length, quantity and known test or document requirements. If some fields are still open, send the drawing or piping-class extract and identify the application. We will review the supply basis and show the remaining confirmations in the quotation.

Stainless steel pipe and tube supplyStainless steel pipe Schedule versus wall thickness310S seamless versus welded pipeStainless steel inspection before shipmentRequest a quotation

Send your RFQ

Required fields are marked with an asterisk.

Up to 5 files · 10 MB each · 50 MB total. PDF, Office, images, DWG, DXF, STEP/STP and IGES/IGS.

    0 files · 0 MB

    By submitting, you agree that Hechuang Stainless Steel may use these details to respond to your request. Privacy notice.