Frequently asked questions
What is the regular published precision-strip range?
The recommended public route used here covers 0.05–3.00 mm thickness and 10–1,570 mm width. Exact 310S availability is matched to condition, edge, tolerance, coil geometry, quantity and inspection.
Is 0.015 mm thickness a standard 310S strip offer?
No. The 0.015 mm × 600 mm figure is a published special ultrathin mill achievement. It requires a separate grade and mill review and is kept distinct from the regular 310S strip route.
Which edge details should I specify for 310S strip?
State the required slit or processed edge, burr limit and direction, camber, surface side and any edge protection. Add the measurement method and sampling plan when the edge is critical to forming.
Can strip coil weight and ID/OD be customized?
They can be reviewed against the master-coil, slitting and rewinding route. Send target and maximum coil weight, inside diameter, outside-diameter limit and whether pancake or another presentation is required.
What inspection is useful for precision strip?
Typical order checks cover traceability, thickness, width, edge, burr, camber, surface and coil geometry. Critical orders should define gauge locations, sample frequency, first-off approval and retained-sample needs.