Is 310S sheet available as hot rolled and cold rolled?

We supply both. Choose cold-rolled sheet for thinner gauge and tighter surface requirements, or hot-rolled coil cut to length for thicker fabrication requirements.

What cold-rolled 310S sheet range can I enquire for?

Our cold-rolled sheet range covers 0.25–8 mm thickness and widths up to 2,500 mm. We confirm the exact 310S combination against the ordered standard, quantity, finish and inspection scope.

Can protective film be added to 310S sheet?

Yes. State whether film is needed, the protected side, film type, peel direction and downstream cutting or forming process. The quotation then aligns film and packing with the selected surface.

How should I specify flatness for cut 310S sheet?

Name the governing dimensional standard or drawing requirement, finished length and width, measurement basis and whether flatness is checked before or after cutting and forming. This avoids mixing mill and processed acceptance points.

What details help quote formed 310S sheet parts?

Send the drawing, thickness, finish side, grain direction if relevant, bend radii, tolerances, quantity, inspection points and packing needs. We will quote the sheet and processing together.

310S Stainless Steel Sheet

310S Sheet for Formed and Lined Components

310S: We supply cold-rolled sheet from 0.25–8 mm thick and hot-rolled sheet from 3–16 mm thick for liners, covers and formed parts. Flat-product widths are available up to 2,500 mm, with exact combinations confirmed in the quotation. Protective film, edge condition, cut lengths and forming can be included.

Open the complete 310S Technical Center

Calculate sheet weight

Stack of thin 310S stainless steel sheets on a supported warehouse pallet

310S at a Glance

Routes: Hot & cold rolled
Size input: Thickness & cut length
Surface: Finish & film
Order focus: Finish & flatness
Processing: Cut & form
Response target: 1 business day

Stock, custom cuts and mill orders

Current stock: We check current stock by grade and exact size before quoting; the ranges below are not a live inventory list.
Custom cutting: We arrange cut sizes from suitable starting material, with cutting allowances and finished dimensions agreed in the quote.
Mill orders: Dimensions or conditions outside available stock are reviewed for mill production. Grade, size combination and order quantity determine feasibility and lead time.

Available Dimensions

Our dimensional supply ranges are shown below with the product form, delivery basis and order requirements beside the numbers.

Cold-rolled sheet route

0.25–8 mm thickness × up to 2,500 mm width

Units: Millimetres (mm).
Product form: Cold-rolled stainless steel sheet or master coil prepared as sheet.
Condition: State cut length, finish, flatness, protective film and edge requirements in the order.
Order scope: Send the 310S product standard, exact dimensions, quantity, tolerance and inspection scope; our written quotation confirms the available combination.

Hot-rolled sheet from coil route

3–16 mm thickness × up to 2,500 mm width before cut-to-length processing

Units: Millimetres (mm).
Product form: Hot-rolled stainless coil converted to ordered sheet length.
Condition: Hot-rolled coil is cut to the ordered sheet length; the quotation states processed flatness and cut-to-length requirements.
Order scope: Send the 310S product standard, exact dimensions, quantity, tolerance and inspection scope; our written quotation confirms the available combination.

The ranges describe supply capabilities, not every grade and size combination. Current stock, custom cuts and mill orders are confirmed separately.

Surface & Condition

The selected finish and delivery condition are recorded with the order. Protective film can cover the required side; bending direction and film compatibility are reviewed before processing.

Cutting and Fabrication

We arrange cut-to-length, blank cutting, punching and bending, with finished dimensions and visible surfaces included in the processing plan.

Guarded press brake forming a supported stainless steel sheet

Inspection Options

We check material identity, dimensions, surface condition and heat traceability against the order. Material test documents are supplied with the agreed document scope; additional testing and third-party inspection can be arranged before production.

Packing for Export

Sheet packs can use surface interleaving, protective film, rigid top and bottom boards, edge guards, moisture protection and timber pallets.

Protected stainless steel sheet stack with interleaving and guarded corners

310S Authority CenterCheck the grade identity, properties and complete 310S supply program.310S CoilSpecify master-coil dimensions, weight, ID/OD and cut-to-length inputs.310S PlateCompare thicker hot-rolled plate, cutting and flatness requirements.310Si2 Stainless SteelWe supply 310Si2 material as EN 1.4841 X15CrNiSi25-21: flat material, bar and fabricated furnace parts for demanding oxidation service.309Si2 Stainless SteelWe supply 309Si2 material as EN 1.4828 X15CrNiSi20-12: flat material, bar and fabricated parts for furnace supports, annealing boxes and hot-air equipment.

Frequently asked questions

Is 310S sheet available as hot rolled and cold rolled?
We supply both. Choose cold-rolled sheet for thinner gauge and tighter surface requirements, or hot-rolled coil cut to length for thicker fabrication requirements.
What cold-rolled 310S sheet range can I enquire for?
Our cold-rolled sheet range covers 0.25–8 mm thickness and widths up to 2,500 mm. We confirm the exact 310S combination against the ordered standard, quantity, finish and inspection scope.
Can protective film be added to 310S sheet?
Yes. State whether film is needed, the protected side, film type, peel direction and downstream cutting or forming process. The quotation then aligns film and packing with the selected surface.
How should I specify flatness for cut 310S sheet?
Name the governing dimensional standard or drawing requirement, finished length and width, measurement basis and whether flatness is checked before or after cutting and forming. This avoids mixing mill and processed acceptance points.
What details help quote formed 310S sheet parts?
Send the drawing, thickness, finish side, grain direction if relevant, bend radii, tolerances, quantity, inspection points and packing needs. We will quote the sheet and processing together.

Request a 310S Sheet Quote

What to Send for a Quote

Send the product standard, thickness, width, length, finish, film, flatness, quantity, fabrication and inspection requirements.

We normally reply within 1 business day. Technical enquiries may require additional review.

Send Your Requirements WhatsApp Sales